This is the bike that defines the very genre that bears its name—the S-Works Enduro climbs with utmost efficiency yet stays calm on even the gnarliest descents. It features a bomber, yet lightweight carbon frame that blissfully tackles the kind of terrain that chews up and spits out lesser bikes.
Specifications
FRAMESET
Seat Binder
Alloy, 38.6mm
Frame
FACT 11m carbon chassis and rear-end, S-Sizing Enduro Race Geometry, SWAT™ Door integration, threaded BB, internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 170mm of travel
SUSPENSION
Rear Shock
SRAM RS SDLXC U SP205X60 LNL1 HB32N9T RX400/450/500/550B1
Geometry & Sizing
Please note, the Enduro features a flip-chip in the lower shock that allows you to alter the geometry. High mode slightly steepens the head angle 0.4° and raises the bottom bracket height by 7mm. This adjustability is accounted for and represented in the geometry chart below.
S2 |
S3 |
S4 |
S5 |
|
B-B Drop |
21 |
21 |
21 |
21 |
B-B Drop (low BB) |
28 |
28 |
28 |
28 |
B-B Height |
354 |
354 |
354 |
354 |
B-B Height (low BB) |
347 |
347 |
347 |
347 |
Chain-Stay Length |
442 |
442 |
442 |
442 |
Crank Length |
170 |
170 |
170 |
170 |
Fork Length (full) |
581 |
581 |
581 |
581 |
Fork Rake/Offset |
46 |
46 |
46 |
46 |
Front-Center (low BB) |
777 |
806 |
833 |
862 |
Handlebar Width |
800 |
800 |
800 |
800 |
Head-Tube Angle |
64.3° |
64.3° |
64.3° |
64.3° |
Head-Tube Angle (low BB) |
63.9° |
63.9° |
63.9° |
63.9° |
Head-Tube Length |
95 |
100 |
110 |
120 |
Reach (low BB) |
437 |
464 |
487 |
511 |
Saddle Width |
155 |
143 |
143 |
143 |
Seat-Tube Angle |
76° |
76° |
76° |
76° |
Seat-Tube Length |
400 |
420 |
440 |
465 |
Seatpost Length |
150 |
180 |
180 |
210 |
Stack (low BB) |
616 |
620 |
629 |
638 |
Stem Length |
40 |
50 |
50 |
50 |
Top Tube Length (Horizontal) |
591 |
619 |
644 |
670 |
Trail (low BB) |
132 |
132 |
132 |
132 |
Wheelbase |
1217 |
1246 |
1274 |
1302 |
*Barring angle values marked by their degree symbol (°), all chart measurements above are listed in millimetres (mm).
Traditional sizing:
Ascend through the sizes and you'll see the seat tubes, head tubes and standover swell considerably. Dropper posts typically couldn't boast longer travel due to the frame restrictions.
Style-specific (S) sizing:
Seat tube lengths, standover height and head tube lengths vary less between sizes. Riders can now size up and yet fit a longer dropper post at their will.
Detailed below are the 2022 S-Works Enduro Frameset's sizes, with their respective rider's height ranges to which they suit.
S2 - 157cm to 173cm (5'2" to 5'8")
S3 - 165cm to 180cm (5'5" to 5'11")
S4 - 173cm to 188cm (5'8" to 6'2")
S5 - 178cm to 193cm (5'10" to 6'4")
Please note, while you may fit snuggly (according to the size guide) into one particular size, we advise you size DOWN for more manoeuvrability in tight corners or playfulness in flicking the bike in the air. Conversely, size UP for more stability through rough fast rock gardens, aggressive root sections, etc. Our staff will happily engage you in this wider sizing conversation to have you riding the right size bike for your height and riding style.
With decades of experience offering quality bikes and service, you can rest assured we have deeply considered the quality of the products we sell and have the technical skills to assist you.
We genuinely want our riders to love their cycling and to achieve this we focus on ensuring our riders purchase the bike they truly need and want and fits their riding purpose.
We also genuinely want to look after our riders post purchase - its a duty of care that we take seriously.
Lastly, we are riders ourselves. We are in this business because we are genuinely passionate about riding all types of bikes and are here to share our knowledge to help enhance your riding experience.